head_banner

Products

Alloy Surface Conditioning Agent LQ-A310

Short Description:


Product Detail

Product Tags

Table transfer LQ-A310

This product is a special surface adjuster for aluminum and aluminum alloy, which can quickly remove the blind holes and aluminum-plastic joints after oxidation of aluminum alloy Residual acid, eliminate bad acid vomiting, improve product yield.

1692266505523

Basic features:

1, completely remove the acid, effectively ensure the yield.
2, at the same time of removing acid, it can also completely open the oxide film to make it dye evenly.

1689317102457
1689317065937

Operating conditions:

entry Scope of control
LQ-A310 3%~10 %
temperature 20%~40℃
between 5~ 10min
Cleaning method Ultrasonic cleaning

1, the consumption of cleaning agent depends on the amount of workpiece treated, 5 kg can handle 100-200 ㎡.
2, if it can not be cleaned by adding, or when the tank is cloudy, the tank needs to be replaced.

Matters needing attention

1. The working environment should have a good ventilation system.

2. Wear protective clothing such as masks and gloves when operating.

3. If it drops into your eyes, please rinse with water for 15 minutes and seek medical attention immediately.

4. If accidentally drops into the mouth, please rinse with water and consult a doctor.

5. In case of skin contact, please rinse with water or wash hands with lye before seeking medical attention.

6. Wash your hands and rinse your mouth with water after work. Please cover it with a lid after use.

Packing specification:

This product is packed in 25KG/ barrel, sealed storage, original factory seal, according to the general chemical transport.
Light loading and unloading to prevent heavy pressure inversion.

hanwang-2_11
hanwang-2_12

  • Previous:
  • Next:

  • Write your message here and send it to us